The best way to determine fit of the Lippert Thin Shade Complete Window Kit part # LC806621 is to check the manufacturer of the door on the trailer. If the manufacturer is Lippert which is the most common then the shade kit will fit and you don't need to worry about any measurements.
If you have another manufacturer, the shade kit will only fit if the cutout for the window is 15" wide x 24" tall. view full answer...
It sounds like you need a Valterra Double RV Waste Valve for your 2021 Dutchmen Coleman Lantern LT Travel Trailer. There are three different types of valves.
3" Hub/1-1/2" Spigot - # TR38
3" Spigot/1-1/2" Hub - # TR38A
3" Spigot/1-1/2" Spigot - # TR38B
You should be able to tell which one you need by inspecting your current connection points. The one end with the lugs on it is the same on all 3 parts so you simply need to determine if you need hubs, spigots, or a combination of both.... view full answer...
Yep, the two will definitely work together, and the reason for that is the 100 watt DuraLite solar panel kit comes with an adapter that allows your round, 2-Pin XLR plug to connect to the Anderson-style connectors of the extension kit. So they would plug right into each other and allow you to hook up to your camper, meaning you can use the following two parts:
- Go Power DuraLite Portable Solar Panel with Digital Solar Controller - 100 Watt # GP66FR
- Extension Cable for Go Power Portable... view full answer...
The MORryde X-Factor Crossmember # MR99ZR is designed for LRE, RE, or TRE Leaf Spring Suspension systems so since you're using the Dexter E-Z Flex Suspension Kit # K71-653-00 you'll want to use the MORryde X-Factor Dropdown Crossmember # MR84AR instead.
The MORryde X-Factor Dropdown Crossmember # MR84AR has an adjustable length of 58-1/4" to 79-3/4", measures 4" down from the center of the mounting holes to the top of the crossmember, and the mounting bolt holes measure 3-3/8" apart on... view full answer...
I'm not sure what specific sub-model of the 2019 Dutchmen Coleman Lantern LT Trailer you have, but I can definitely tell you which models the Adco Polypropylene Storage Lot RV Cover # 290-74840 you referenced will fit and work great on. This particular unit is designed for trailers like this that are between 18 and 20 feet long.
It will fit your Coleman LT as long as you have the 17RD, 17FQ, 17FQWE, 18RB, or the 18RBWE model. There are a couple other Coleman Lantern LT sub-models that... view full answer...
The Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks # LC281281 is designed to work with 3" diameter axles. With how small your 2020 Coleman Lantern LT 17B travel trailer is you most likely have a lower capacity axle, which is most likely 2-3/8" in diameter. If this is the case then you'll just need part # LC281255 instead to get the correct mounting hardware.
I recommend getting under your trailer and looking for the axle tag, which will give you the capacity, or measuring the diameter... view full answer...
The manufacturer unfortunately doesn't list the tire size used online so I'll need to see the code on the sidewall (pictured below) of your tire to determine the correct replacement. The Karrier # AM32182 you were looking at has a tire size of ST215/75R14. Since there are older models that have this same size it's likely going to be the same but it's definitely best to doublecheck before purchasing. If you have any preferences on wheel style/color let me know that as well. view full answer...
The specs I'm seeing for your 2021 Dutchmen Coleman Lantern LT 214BH Travel Trailer show it being 25.92' in length. For your northern PA climate I recommend the Adco Olefin HD All-Climate + Wind RV Cover for Travel Trailer - Up to 26' Long - Gray # AD77ZR. This cover is ADCO's new design and is made for use in all climates. It has a top panel constructed of Olefin HD fabric that blocks harmful UV rays that can cause cracking and fading, beads water on contact, prevents dirt and dust particles... view full answer...
Go To Results